Nitromors All Purpose Paint & Varnish Remover Paint Stripper, 750ml

Nitromors All Purpose Paint & Varnish Remover Paint Stripper 750ml

Removing old paint and varnish is an important part of preparing surfaces for redecorating, particularly when previous coatings have become damaged, uneven or heavily layered. Nitromors All Purpose Paint & Varnish Remover Paint Stripper 750ml offers a powerful solution for stripping unwanted decorative coatings from suitable wood, metal and masonry surfaces.

Whether you're removing old gloss paint from wooden doors, stripping varnish from furniture or preparing painted metalwork for restoration, this specialist paint remover helps soften existing coatings so they can be carefully scraped away.

Its thick, non-drip gel formulation is particularly useful when working on upright surfaces, while the distinctive green colour makes it easier to see exactly where the paint stripper has been applied.

Effective Paint Stripping for Wood, Metal and Masonry

Different decorating projects often require the removal of old paint from a variety of surfaces.

Nitromors All Purpose Paint & Varnish Remover is designed to remove compatible paints, varnishes and lacquers from suitable wood, metal and masonry, including concrete.

This makes it a versatile option for restoring wooden furniture, preparing door frames for repainting, stripping old finishes from metalwork and tackling appropriate painted masonry surfaces.

The powerful formulation penetrates existing coatings, helping soften and loosen the finish before removal with a suitable paint scraper or stripping knife.

For DIY enthusiasts wondering how to remove old paint from wood or strip varnish before refinishing, Nitromors provides an effective chemical paint-stripping option when used in accordance with the manufacturer's instructions.

Non-Drip Gel for Vertical Surfaces

One of the most useful features of Nitromors All Purpose Paint & Varnish Remover is its thick gel consistency.

Unlike thinner paint-removal liquids, the non-drip formula is designed to cling to suitable vertical surfaces, reducing runs and making application easier to control.

This is particularly helpful when stripping paint from wooden doors, door frames, skirting boards and other upright surfaces.

The manufacturer recommends applying the gel in a thick layer of approximately 2–3mm, allowing the formulation to work into the existing coating.

Its distinctive green colour also helps you identify treated areas, making it easier to achieve more even coverage and spot sections that may require additional attention.

Remove Old Paint, Varnish and Lacquer

Older painted surfaces can accumulate several layers of decorative coatings over time.

When these coatings begin to crack, peel or become uneven, removing them may be necessary before applying a new finish.

Nitromors All Purpose Paint & Varnish Remover is designed to help strip compatible paint, varnish and lacquer coatings, reducing the amount of manual scraping required.

Once the coating has softened sufficiently, it can be carefully removed using an appropriate stripping knife or scraper.

Stubborn finishes or heavily layered surfaces may require further treatment, depending on the type and condition of the existing coating.

Prepare Surfaces for Repainting and Restoration

Effective surface preparation helps achieve a better result when repainting furniture, woodwork or metal surfaces.

By removing unwanted decorative coatings, Nitromors helps expose the underlying material so it can be inspected, cleaned and prepared for its next finish.

It is particularly useful for furniture refurbishment, door restoration, decorating preparation and other home improvement projects where old paint or varnish needs to be removed.

The formulation is dichloromethane-free and can be cleaned using water or suitable solvents in accordance with the manufacturer's instructions.

With coverage of up to approximately 2m² per 750ml container, depending on application thickness, it provides a practical option for a range of paint-stripping tasks.

Only tackling a smaller job?

Our Nitromors All Purpose Paint & Varnish Remover 375ml offers the same non-drip paint-stripping formula in a smaller container, ideal for occasional decorating and furniture-restoration projects.

Ideal For

• Removing old paint from suitable wooden doors and door frames

• Stripping varnish from wooden furniture

• Removing compatible gloss paint from woodwork

• Preparing skirting boards for repainting

• Stripping decorative coatings from suitable metal surfaces

• Removing compatible paint from masonry and concrete

• Furniture restoration and refurbishment

• Preparing surfaces for painting, priming or varnishing

• Removing unwanted lacquer finishes

• General decorating preparation and paint-removal projects

How to Use

1. Prepare the work area: Ensure good ventilation, protect surrounding surfaces and remove nearby ignition sources. Wear appropriate chemical-resistant gloves, eye protection and any additional protective equipment specified on the container.

2. Check suitability: Confirm that the surface and existing coating are compatible with the product. Test a small, inconspicuous area before beginning.

3. Prepare the surface: Remove loose dirt and debris. Follow the manufacturer's instructions for any further surface preparation.

4. Apply the gel: Using a suitable brush, apply a thick, even layer of approximately 2–3mm to the coating. Avoid brushing the product out too thinly.

5. Allow the paint stripper to work: Leave the product to penetrate and soften the existing coating for the period stated on the container. Do not allow it to dry out.

6. Check the coating: Carefully test a small section with a suitable scraper to establish whether the paint or varnish has softened sufficiently.

7. Remove the softened finish: Use an appropriate stripping knife or scraper to lift away the loosened coating without damaging the underlying surface.

8. Repeat where necessary: Stubborn paint or varnish may require further application.

9. Clean the treated surface: Remove remaining residue using water or a suitable solvent, following the manufacturer's instructions and taking account of the surface material.

10. Allow to dry: Ensure the surface is completely clean and dry before sanding, priming, repainting or applying a new finish.

Always follow the latest product label and safety instructions. Do not use on surfaces or coatings where compatibility has not been established.

Key Features

• Powerful paint and varnish remover – designed to strip compatible decorative coatings.

• Suitable for wood, metal and masonry – versatile for a range of decorating and restoration projects.

• Removes paint, varnish and lacquer – useful for preparing surfaces for refinishing.

• Thick non-drip gel – designed to cling to vertical surfaces and minimise running.

• Distinctive green colour – makes treated areas easier to identify.

• Dichloromethane-free formulation – manufactured without dichloromethane.

• Water and solvent washable – allows residue removal using the manufacturer's recommended cleaning methods.

• Ideal for surface preparation – helps remove unwanted finishes before repainting or restoration.

• 750ml container – suitable for a range of household decorating projects.

• Up to 2m² coverage – depending on surface condition and application thickness.

Product Specifications

• Brand: Nitromors

• Product Name: All Purpose Paint & Varnish Remover

• Product Type: Chemical Paint Stripper and Varnish Remover

• Size: 750ml

• Formulation: Thick Non-Drip Gel

• Colour: Green

• Suitable Surfaces: Compatible Wood, Metal and Masonry, Including Concrete

• Suitable Coatings: Compatible Paints, Varnishes and Lacquers

• Formula: Dichloromethane-Free

• Application Thickness: Approximately 2–3mm

• Coverage: Up to Approximately 2m² per 750ml

• Cleaning: Water or Suitable Solvent, Following Manufacturer Instructions

• Application Method: Suitable Brush

• Pack Quantity: 1 x 750ml Container

• Barcode: 5010373142769