Polycell Maximum Strength Paint Stripper, 500ml

Polycell Maximum Strength Paint Stripper, 500ml

Removing old paint and varnish can be one of the most time-consuming parts of a decorating project, particularly when several layers of coating have built up over the years. Polycell Maximum Strength Paint Stripper 500ml provides an effective solution for stripping unwanted paint and varnish from suitable wood and metal surfaces, helping you prepare them for a fresh finish.

Whether you're restoring wooden furniture, stripping old paint from a door frame or preparing metalwork for repainting, this powerful paint remover helps soften and lift existing coatings so they can be scraped away more easily.

Working on a larger project? See our

Polycell Maximum Strength Paint Stripper, 1L

Effective Paint Stripping for Wood and Metal

Polycell Maximum Strength Paint Stripper is designed for removing most types of decorative paint and varnish from suitable wooden and metal surfaces.

It can be used on interior and exterior projects, making it a versatile choice for furniture restoration, decorating preparation and general home improvement.

The powerful formula penetrates existing paint layers, helping soften the coating so it can be removed using a suitable stripping knife or scraper.

On solvent-based coatings, the paint may visibly blister and lift from the surface. Water-based coatings may soften without producing the same blistering effect.

Removes Multiple Layers of Old Paint

Older doors, skirting boards, furniture and other painted surfaces can accumulate several coats of paint over time.

Polycell Maximum Strength Paint Stripper is capable of removing up to 12 layers of paint in one application, depending on the type and condition of the existing coating.

The formula begins working from 20 minutes, although particularly stubborn or heavily layered coatings may require a longer treatment period or repeat application.

This makes it a practical alternative to extensive manual scraping when tackling suitable paint-removal projects.

Non-Drip Formula for Easier Application

The non-drip consistency helps make application more manageable, particularly when stripping paint from vertical surfaces such as wooden doors, door frames and other suitable woodwork.

Apply the product generously and evenly using an appropriate brush or flat-bladed tool, allowing it to penetrate the coating before carefully removing the softened material.

Once the old paint or varnish has been stripped away, the surface can be cleaned and prepared for its next decorative finish.

Prepare Surfaces for Repainting or Refinishing

Effective surface preparation is essential when decorating, particularly when existing paint is peeling, damaged or unsuitable for recoating.

By removing unwanted layers of paint and varnish, Polycell Maximum Strength Paint Stripper helps you get back to a suitable surface before sanding, priming, painting or applying a new finish.

The 500ml container provides coverage of up to approximately 0.8m², depending on the surface and thickness of application.

For anyone wondering how to strip paint from wood or remove old varnish before redecorating, this specialist paint remover offers a practical solution when used in accordance with the manufacturer's instructions.

Ideal For

• Stripping old paint from suitable wooden doors

• Removing paint from door frames and skirting boards

• Preparing wooden furniture for restoration

• Removing old varnish before refinishing wood

• Stripping compatible paint coatings from metal surfaces

• Removing multiple layers of decorative paint

• Interior and exterior paint-removal projects

• Preparing surfaces for repainting or varnishing

• General decorating preparation and refurbishment

How to Use

1. Prepare the area: Work in a well-ventilated location, protect surrounding surfaces and wear suitable chemical-resistant gloves and eye protection.

2. Check the surface: Confirm that the product is compatible with the material and existing coating. Test a small, inconspicuous area before proceeding.

3. Prepare the coating: Follow the manufacturer's guidance for lightly scoring or preparing the existing paint surface. Avoid disturbing potentially hazardous old coatings without appropriate precautions.

4. Apply the paint stripper: Using a suitable brush or flat-bladed tool, apply a generous, even layer to the painted or varnished surface.

5. Allow time to work: Leave the product until the coating begins to blister or soften. It can begin working from 20 minutes and may be left for up to four hours where necessary, following the instructions on the container.

6. Test the coating: Carefully test a small section with a suitable scraper to check whether the paint or varnish has softened sufficiently.

7. Remove the coating: Use a stripping knife or shave hook to carefully lift away the softened paint or varnish.

8. Repeat if necessary: Stubborn coatings or remaining layers may require additional treatment.

9. Clean the surface: Follow the manufacturer's instructions for cleaning away remaining residue. Water can be used, while white spirit may be preferable on suitable wood to help avoid raising the grain.

10. Allow to dry: Ensure the surface is clean and completely dry before further preparation, painting or varnishing.

Always read the product label and safety instructions before use.

Key Features

• Maximum strength paint remover – designed to strip old paint and varnish from suitable surfaces.

• Works from 20 minutes – begins softening compatible coatings for removal.

• Removes up to 12 layers – capable of stripping multiple paint coats in one application, depending on conditions.

• Suitable for wood and metal – ideal for compatible furniture, doors, woodwork and metal surfaces.

• Interior and exterior use – versatile for a range of decorating and restoration projects.

• Works on solvent-based and water-based coatings – suitable for many common decorative paints and varnishes.

• Non-drip consistency – helps make application more manageable on vertical surfaces.

• Water-washable residue – allows cleaning in accordance with the manufacturer's instructions.

• Ideal for surface preparation – helps remove unwanted coatings before repainting or refinishing.

Product Specifications

• Brand: Polycell

• Product Name: Maximum Strength Paint Stripper

• Product Type: Chemical Paint and Varnish Remover

• Size: 500ml

• Formulation: Non-Drip Paint Stripper

• Suitable Surfaces: Wood and Metal

• Suitable Coatings: Many Solvent-Based and Water-Based Paints and Varnishes

• Application: Interior and Exterior

• Working Time: From 20 Minutes

• Maximum Treatment Time: Up to 4 Hours, Following Manufacturer Instructions

• Paint Removal: Up to 12 Layers in One Application, Depending on Conditions

• Coverage: Up to Approximately 0.8m² per 500ml

• Application Method: Suitable Brush or Flat-Bladed Tool

• Barcode: 5010212558454

• Pack Quantity: 1 x 500ml Container